The icon for form elements of type button.

Functionality

The form element button adds buttons to the current form. Each button element may contain multiple buttons. By default, this element contains two buttons, back and next. To add or delete buttons, go to the section value on the right hand side.

For each button, you can select the action when the user clicks the button. Currently available actions are moving to a different page of the form, submitting the form, or saving the form when the user wishes to continue filling out the form at a later time. For more details, see the section values below.

Additional base properties for buttons. You can specify how the buttons should be aligned.

Base properties

Basic settings for Base properties

User interface for changing basic properties of a form field, such as its name or its width.

Elements can be repeated. In this example, the user can enter one or more email addresses.

The number of repetitions can also be set automatically, depending on the value of another element. In this example the fieldset with the data of a single child is repeated. There are always as many fieldsets as the number of children the user selected.

The base properties name, width and hidden can be set for each form field.

Base properties

NameDescription
element6.3.0+ Element type of the form field. The element type can be changed by selecting another element type in the dropdown menu. The element types an element can be transformed into depend on the original type. Containers and fieldsets can only be transformed into the respective other element type. All other element types can be transformed into any other type, except for containers and fieldsets.
nameName of the form field. Only letters and numbers may be used.
aliasAn alternative name for the form element, which may contain any characters. See below.
widthWidth of the form, relative to the width of other form fields on the same row. For example, when placing two form fields next to each, giving both a width of 2 means that both will take 50% of the available width. Setting the width of the first form field to 1, and the width of the second one to 3 results in the first one taking 25% of the available width, and the second one taking 75%. 
hiddenWhen checked, the form field will be hidden initially. To show it again, the option visible if can be used, or a Javascript function such as  jQuery.fn.visible
disabledWhen checked, the content of the form field cannot be edited.
RepeatWhen this option is activated, the user can freely create any number of copies (repetitions) of this form element. For example, this can be used to let the user enter one or multiple email addresses. Please note that you cannot nest repeated elements: if a container is marked as repeated, none of its containing elements can be repeated.
Min. repeatMinimum number of allowed repetitions. When this limit is reached, the user cannot delete any more repeated elements. This is also the inital number of repetitions when the form is opened.
Max. repeatMaximum number of allowed repetitions. When this limit is reached, the user cannot add any more repeated elements.
Repeat triggerWhen an element is selected here: The number of repeated elements is automatically set to the value of the selected element. For example: Assume there is a select element or input element that lets the user enter number of children in their household. Also assume there is a fieldset for entering some data of these children. The fieldset is marked as repeated, and the select or input element is set as the repetition trigger. Now when the user enters how many children they have got, fieldsets are removed or created automatically so that there is always one fieldset for each child.
Hide buttons6.2.0+  Available only when an element was selected for Repeat trigger. Enable this option to hide the plus and minus buttons for adding and removing repeated elements. Use this option when the number of repeated elements should be controlled only by trigger.

Alias

When a form is submitted, key-value pairs are sent with the name of the form being the key and the entered text being the value. Within workflow actions or templates, you can access the values of submitted form elements with variables. The name of a form element cannot contain special characters such as accented characters (é or ô). When sending data to web services or when integrating third party systems, it may become neccessary to make use of special characters. In this case, you can set an alias for a form element. This alias does not have any restrictions on which characters you can use.

This form element possesses the following additional properties for the section Base properties.

NameDescription
AlignmentChanges the alignment (left, right, centre) of the buttons.

For every button, you can enter the text that is shown in the form, and a name used for the HTML. You can also choose which action to perform when the button is pressed.

Value

Basic settings for Value

Value for input fields.

Value for selection elements.

This property defines the initial value of the element. Depending on the selected item, there are different options to choose from. For more details on the value of particular elements, see the list of available form elements.

It is not possible to define initial values for "repeated" elements or elements that are in repeated containers in this way.

This form element possesses the following additional properties for the section Value.

NameBeschreibung
TextThe text or label of the button the user sees.
NameThe value of the HTML attribute name of the HTML input. This name can be used for selecting the button via JavaScript or CSS. For example the CSS [name=btnSubmit] { width:100%;} makes the button named btnSubmit take up the entire available width.
ActionSelect what should happen when the user clicks the button.

Add and delete buttons

A new row for adding new button is added automatically as neccessary. To delete a button, press on the   icon on the left. You can also move the buttons via drag&drop to change their order (use   icon for dragging).

Available actions

Each button lets you specify an action. You can also choose whether to validate the form or not. When you validate the form, checks are done to ensure that no required fields were left empty and that no invalid data was entered.

The following actions are available.

NameBeschreibung
No actionNo action happens by clicking the button. You can use this option if your own action should get implemented with Javascript. The following example displays a short message if you press the button with the name btnAlert.
$('[name=btnAlert]').click(() => alert("The button was pressed."));
Page xNavigates to the selected page. There is a separate action for each page.
Page x + checkNavigates to the selected page, unless any form fields on the current page are invalid (missing input or wrong input).
SubmitSends the form to the server and creates a new form record. The form is sent even if it is invalid.
Sumbit + checkChecks whether the form is valid and if it is, sends the form to the server. Otherwise, informs the user about missing or invalid data by showing error messages.
Submit no saveSends the form to the server, without creating a new form record. This action should be used if you only need to run a workflow.
Submit no save popupSends the form to the server, without creating a new form record. The returned response page is shown as a popup. This action should be used if you only need to run a workflow. One use case for this action is to create some files on the server and return those files to the user while keeping the form open. See also the workflow action file download.
SaveSaves the form data on the server, but do not run any workflow. Usually this is used to let the user save their current progress and fill out the rest of the form later. This does not validate the form.
Save + checkValidates the form, and if it is valid, saves the form data on the server only. Usually this is used to let the user save their current progress and fill out the rest of the form later.

Constraints

Basic settings for Constraints

The constraints panel contains options to check the value of form fields, when form fields should be visible and when they can be edited. Some constraints are available only for some element, see the list of element..

Properties

A form field can be made a required field, requiring the user to enter something or select an option.
NameDescription
hidden ifHides the form fieldm when a certain conditions is satisfied.
visible ifMakes a form field that has been hidden visible again, when a certain condition is satisfied.
read-only ifLocks a form field and disallows any input, when a certain condition is satisfied.
editable ifMake a form field that has been set to read-only editable again, when a certain condition is satisfied.
requiredWhen this option is activated, a value must be entered for the form field. Conditions set under required if are ignored when this option is activated.
required ifMarks a form field as a required field, when a certain condition is satisfied.
required groupAvailable only when the form field is a required field. Specifies the required group the form field should belong to. When two or more form fields belong to the same group, at least one of these form fields needs to be filled out, all other fields may remain empty.

Condition

Any condition referring to the value of a select element uses the value of the option for testing the condition, as entered in the colum value.

You can change a form field's visibility and read-only state depending on the value of another form element. The following conditions are available for the options hidden if, visible if, read-only if, editable if, and required if:

  • has a value
  • has no value
  • equals
  • not equals
  • lower than
  • lower equal than
  • greater than
  • greater equal than
  • between
  • regular expression

You can also select elements with the element picker to the right. Click on the hand-shaped icon and then on the element you would like to use. This comes in handy when editing forms with many form fields.

ConditionDescription
has a value / has no value

The conditions evaluates to true when the value of the form field is (not) empty.

In particular, having a value mean the following for different form elements:

  • for a checkbox, that the checkbox is not checked.
  • for a selection, that some option other than Please select an option has been selected. When the selection field is displayed as a combo box, the first option will be selected by default, unless the selection is a required field, in which case the option Please select an option will be selected by default.
  • for an input field, that at least one character has been entered.
equalsThe condition evaluates to true when the value of the form field equals the given value. Comparisons are case-sensitive.
not equalsThe condition evaluates to true when the value of the form field does not equal the given value. Comparisons are case-sensitive.
lower than / lower or equal thanThe condition evaluates to true when the value is lower (or equal) than the specified value.
greater than / greater or equal thanThe condition evaluates to true when the value is greater (or equal) than the specified value.
betweenThe condition evaluates to true when the value is between the specified range, inclusively. The interval must be entered with a dash (-), for example 2-10. Negative numbers must be enclosed in parentheses, eg. (-10) - (- 5).
regexpThe condition evaluates to true when the value matches the specified regexp.

Clear or reset automatically

For the properties hidden if and read-only if, you may choose whether the form field should be cleared or reset automatically when the form field ist hidden or disabled. Clearing a form field means that its value is removed, eg. deleting the entered text for an input field or unchecking all checkboxes for a select field. Resetting a form field, on the other hand, refers to changing its value back to the original or initial value it had when the form was openend. In case the form was opened for the first time and not submitted yet, the original value is the value as set in the Xima® Formcycle Designer. Otherwise, when the form was already submitted and is opened in the inbox, the original value is the most recently submitted (saved) value.

For example, consider the case of entering an address. The user can choose between a physical address and a post-office box, and only one input field is visible depending on the user's choice. When the form is submitted, a value should be send only for one of both fields. By selecting the empty automatically options, the input field post-office box will be cleared automatically when the user selects a physical address.

When an element is cleared or reset, all the elements it contains are cleared or reset as well. This applies to form elements of type page, container, and fieldset.

This form elements does not possess any additional settings for the section Constraints.

CSS classes

Basic settings for CSS classes

Selecting CSS Classes.

This property lets you select one or many CSS classes for an element. The available CSS classes are read from the CSS in the CSS tab and from the selected CSS theme. When you select or deselect a class, the changes are applied immediately and any layout or design changes are visible in the form. You can also filter the available classes by using the filter at the end of the list.

This form elements does not possess any additional settings for the section CSS classes.

Attributes

Basic settings for Attributes

Arbitrary custom HTML attributes are deprecated. HTML5 defines so-called data- attributes that can be used to store custom data in HTML elements. For example, it is ok to use the attributes data-price or data-serial-id, but you should not use attributes such as price or serialId.

The panel attributes lets you add custom attributes to the corresponding HTML elements of each form element. You can access them with JavaScript later, or add existing HTML attributes such as the attribute type for <input> elements.

This panel lets you add custom HTML attributes that may be needed for custom features implemented via JavaScript.

A custom HTML attribute has been added and can be seen when inspecting the generated HTML.

Adding an attribute

To add an HTML attribute, just enter the name and the value of the attribute into one of the columns. A new, empty column will be added automatically.

Deleting an attribute

Click on the   icon to the left to delete an attribute.

Accessing data attributes via JavaScript

If you want to add custom data to an element, use the prefix data- for the name. Additionally, the attribute name should contain no uppercase letters and use dashes to separate words. For example, data-serial-version is a good data attribute, dataSerialVersion is not. When accessing these attributes via JavaScript, remove the dashes and capitalize the first letter of each word.

Assuming the attribute data-serial-version was set to 1aFXc for the element tfSerialVer, you can access this data as follows:

const serialVersion = $("[name='tfSerialVer']").data("serialVersion");
console.log("Serial version is:" , serialVersion);

This form elements does not possess any additional settings for the section Attributes.

Available only if

Basic settings for Available only if

The property Available only if controls whether elements are displayed or not depending on the current state or user.

Note that when an element is not available, it is never rendered and will not be present anywhere in the HTML. This means that users cannot see the form field or its current data even if they take a look at the source code of the form.

This lets you restrict the form field to a certain user group or to a certain state.

When only one state or a user group is selected, the form element is displayed only when the form is in the selected state or viewed by a user of the selected user group. For each state and user group there is also the opposite option to display a form element only when it is not in the selected state or not viewed by the selected user group. For example, when you want display a form element only when a user fills out the form for the first time, you can select the option no state.

If both a state and a user group are selected, the form element is displayed only when the form is both in the selected state as well as opened by a user belonging to one of the selected user groups.

The selection no state means that the form was opened for the first time and not submitted yet.

This form elements does not possess any additional settings for the section Available only if.

Other

Basic settings for Other

Comments can be added for internal use. They will not be visible to the user when they open the form.

You can add a comment for internal use that will not appear anywhere in the form.

This form elements does not possess any additional settings for the section Other.

Created by gru on 25.03.2019, 12:11
Translated into en by gru on 25.03.2019, 12:11
Copyright 2000-2020